features sop (small outline package) 4.5 x 7.3 x 2.3 mm max high speed response t phl , t plh = 50 ns typ high isolation voltage bv = 2500 v r.m.s. min low input current i fhl = 2.5 ma typ taping product number PS9701-f3 description PS9701 is an optically coupled isolator containing a gaaias led on the light emitting side (input side) and a photodiode and a signal processing circuit on the light receiving side (output side) on one chip. this is an sop (small out-line package) type for high density applications. PS9701 high speed digital output type sop optocoupler applications computer and peripheral memory electronic instrument audio-visual interface electrical characteristics (t a = 25 c) part number PS9701 symbol parameters units min typ max v f forward voltage, i f = 10 ma v 1.4 1.65 1.9 i r reverse current, v r = 5 v a10 c t capacitance, v = 0, f = 1 mhz pf 60 i oh high level output current a 2 250 vcc = v o = 5.5 v, i f = 250 a, t a = 0 to 70 c v ol low level output voltage v 0.3 0.6 vcc = 5.5 v, i f = 7.5 ma, i o = 13 ma, t a = 0 to 70 c i cch high level supply current, v cc = 5.5 v, i f = 0, t a = 0 to 70 cma4 6 8 i ccl low level supply current, v cc = 5.5 v, i f = 10 ma, t a = 0 to 70 c ma 9 12 15 i fhl threshhold input current, high low ma v cc = 5 v, v o = 0.8 v, r l = 350 ?, t a = 25 c 0.5 2.5 5 v cc = 5 v, t a = -40 to +85 c, v o = 0.8 v, r l = 350 ? 7 r 1-2 isolation resistance, v in-out = 1 k v dc , rh = 40 to 60% ? 10 11 c 1-2 isolation capacitance, v = 0, f = 1 mhz pf 0.4 t phl propagation delay time 1 , high low ns 50 75 v cc = 5 v, i f = 7.5 ma, r l = 350 ?, c l = 15 pf t plh propagation delay time 1 , low high ns 50 75 v cc = 5 v, i f = 7.5 ma, r l = 350 ?, c l = 15 pf t r rise time, v cc = 5 v, i f = 7.5 ma, r l = 350 ?, c l = 15 pf ns 20 t f fall time, v cc = 5 v, i f = 7.5 ma, r l = 350 ?, c l = 15 pf ns 10 diode detector 1.test circuit for propagation delay time *c l is approximately 15 pf, which includes probe and stray wiring capacitance. coupled t plh t phl input output 0 5 v 1.5 v v ol 350 mv (i f = 7.5 ma) 175 mv (i f = 3.75 ma) 16 34 5 0.01 f i f i f monitor pulse input v cc = 5 v r l = 350 ? v o = monitor c l 51 ? pw = 1 s duty cycle = 1/10 () esd sensitive california eastern laboratories
absolute maximum ratings 1 (t a = 25 c) symbols parameters units ratings diode i f forward current ma 30 v r reverse voltage v 5 detector v cc supply voltage v 7 v o output voltage v 7 i o output current ma 50 p c power dissipation mw 85 coupled bv isolation voltage 2 v r.m.s. 2500 t op operating temperature c -40 to +85 t stg storage temperature c -55 to +125 outline dimensions (units in mm) PS9701 1. anode 3. cathode 4. gnd 5. v o 6. v cc 4.0 0.5 2.1 0.2 2.0 1.27 0.1 0.1 0.4 +0.10 -0.05 0.25 m 0.15 +0.10 -0.05 7.0 0.3 0.5 0.3 4.4 6 1 54 3 maximum forward current vs. ambient temperature maximum forward current, i f (ma) ambient temperature, t a ( c) power dissipation vs. ambient temperature power dissipation, p c (ma) ambient temperature, t a ( c) typical performance curves (t a = 25 c) 50 40 30 20 10 0 20 40 60 80 100 100 80 60 40 20 0 20 40 60 80 100 notes: 1. operation in excess of any one of these parameters may result in permanent damage. 2. ac voltage for 1 minute at t a = 25 c, rh = 60% between input and output. recommended operating conditions part number PS9701 symbols parameters units min typ max i fl low level input current a 0 250 i fh high level input current ma 5 7.5 15 v cc supply voltage v 4.5 5 5.5 t op operating temperature c 0 25 70 * by-pass capacitor of more than 0.1 f is used between v cc and gnd near the device. PS9701 top view part package packing style safety standards number approval PS9701 5 pin sop magazine case 100 pcs ul approved PS9701-e3 embossed tape 900 pcs/reel PS9701-e4 PS9701-f3 embossed tape 3500 pcs/reel PS9701-f3 PS9701-v magazine case 100 pcs vde0884 approved PS9701-v-e3 embossed tape 900 pcs/reel PS9701-v-e4 PS9701-v-f3 embossed tape 3500 pcs/reel PS9701-v-f4 ordering information
typical performance curves (t a = 25 c) forward current, i f (ma) forward current, i f (ma) ouput voltage vs. forward current forward voltage, v f (v) output voltage, v o (v) forward current vs. forward voltage normalizedthreshold input current, i fhl ambient temperature, t a ( c) normalized threshhold input current vs. ambient temperature ambient temperature, t a ( c) low level output voltage vs. ambient temperature low level output v oltage, v ol (v) 100 10 1 0.1 0.01 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 t a = 100 ?c 50 ?c 25 ?c 0 ?c -25 ?c i fhl is normalized data to 1 at t a = 25 ? c, v cc = 5 v v o = 0.8 v, r l = 350 ? 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 -25 0 25 50 75 100 5 v r l v o r l = 100 ? r l = 350 ? r l = 1 k ? 7 6 5 4 3 2 1 024681012 i f = 7.5 ma v cc = 5.5 v i ol = 13 ma i ol = 5 ma 1.5 1.25 1.00 0.75 0.5 0.25 0 -25 0 25 50 75 100 propagation delay time vs. forward current propagation delay time, t phl , t plh (ns) forward current, i f (ma) propagation delay time vs. load resistance propagation delay time, t phl , t plh (ns) load resistance, r l ( ? ) v cc = 5 v r l = 350 ? t plh t phl 80 60 40 20 0 5 10 15 20 25 30 i f = 7.5 ma v cc = 5 v pw = 1 s duty 1/10 t plh t phl 1000 500 100 50 10 100 500 1 k 5 k 10 k 50 k PS9701
typical performance curves (t a = 25 c) propagation delay time, t phl , t plh (ns) ambient temperature, t a ( c) propagation delay time vs. ambient temperature switching time, t r , t f (ns) ambient temperature, t a ( c) switching time vs. ambient temperature i f = 7.5 ma v cc = 5 v r l = 350 ? t plh t phl 120 100 80 60 40 20 0 -50 -25 0 25 50 75 100 i f = 7.5 ma v cc = 5 v r l = 350 ? t r t f 25 20 15 10 5 0 -50 -25 0 25 50 75 100 PS9701
taping specifications (units in mm) outline and dimensions (reel) packing: 3500 pcs/reel outline and dimensions (tape) 4 0.1 2 0.1 1.55 0.1 4.6 0.1 8 0.1 1.55 0.1 12 0.2 5.5 0.1 1.75 0.1 2.4 0.1 0.3 7.4 0.1 tape direction PS9701-f3 PS9701-f4 nec 9701 402 nec 9701 402 nec 9701 402 PS9701 2.0 0.5 1.5 0.5 12.4 +2.0 -0.0 21.0 0.8 6.0 1 120 330 805.0 13.00.5 60 1.5 0.1 1.5 0.1 outline and dimensions (reel) packing : 900 pcs/reel outline and dimensions (tape) 4 0.1 2 0.1 1.55 0.1 4.6 0.1 8 0.1 1.55 0.1 12 0.2 5.5 0.1 1.75 0.1 2.4 0.1 0.3 7.4 0.1 tape direction PS9701-e3 PS9701-e4 nec 9701 402 nec 9701 402 nec 9701 402 13.0 1.0 180 13.0 0.5 21.0 0.8 60 13.0 0.5 2.0 2.0 0.5 15 15 nec 9701 402 nec 9701 402 nec 9701 402 nec 9701 402 nec 9701 402 nec 9701 402
PS9701 recommended soldering conditions (1) infrared reflow soldering peak reflow temperature 235 c or below (package surface temperature) time of temperature higher than 210 c 30 seconds or less number of reflows three flux rosin flux containing a small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt % is recommended (2) dip soldering temperature 260 c or below time 10 seconds or less number of times one flux rosin flux containing a small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt % is recommended.) (3) cautions fluxes avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. time (s) package surface temperature t ( ? c) 120 to 160 ? c 60 to 90 s (preheating) (heating) to 10 s to 30 s 235 ? c (peak temperature) 210 ? c exclusive north american agent for rf, microwave & optoelectronic semiconductors california eastern laboratories headquarters 4590 patrick henry drive santa clara, ca 95054-1817 (408) 988-3500 telex 34-6393 fax (408) 988-0279 24-hour fax-on-demand: 800-390-3232 (u.s. and canada only) internet: http://www.cel.com 12/04/2001 data subject to change without notice life support applications these nec products are not intended for use in life support devices, appliances, or systems where the malfunction of these prod ucts can reasonably be expected to result in personal injury. the customers of cel using or selling these products for use in such applications do so at their own risk and agree to fully indemnify cel for all damages resulting from such improper use or sale.
|
